Introduction to pressure systems and equipment
£20 + VAT
In our Introduction to pressure systems and equipment course you will gain a detailed insight into workplace pressure systems and equipment, what they are, the types available and their uses. We will cover health and safety responsibilities and how to reduce and prevent the risk of accidents .
Get started immediately
All about this Introduction to Pressure Systems and Equipment course
On completion of the course, students will gain knowledge about pressure systems and equipment that are found in workplaces. This course will cover what they are, the types available and their uses. Students will learn about the various instruments that are used to measure pressure and the pressure system categories.
Students will learn about hazards and risks, what they are and what can happen if a pressure system fails. The course will cover fire hazards in relation to pressure systems, risk assessments and pressure related accidents and incidents.
Students will go on to learn about the health and safety at work etc. Act.1974 and the pressure systems safety regulations 2000. We will cover protective devices, PUWER and what can result from prosecutions under health and safety legislation.
The course will cover the hierarchy of hazard controls, the use of lower-pressure systems. Students will explore the responsibilities of a competent person and be introduced to (WSE) written scheme of examination. Finally students will learn about the maintenance of pressure systems and emergency procedures.
In order to complete the course, you must achieve 80% or more in the final multiple choice quiz.
You will earn 3 CPD points on completion of the course, this course will take around 3 hours to complete and the certificate will last for two years.
- Fully CPD registered
- Completed online with instant downloadable certificate
- Fully printed certificate posted next day
- Complete the online multiple choice assessment as many times as you need to pass
Units covered on this course
Introduction to pressure systems and equipment
In the first unit students will be introduced to pressure systems and equipment and consider what they are. You will examine pressure, how it is calculated and why it can be dangerous. This unit will also provide an overview of statistics and case studies relating to pressure systems and equipment.
Hazards and risks
In the second unit students will have an introduction to pressure systems hazards and risks and learn what these terms mean. We will cover the hazards and risks associated with pressure systems, equipment and vessels. Students will look at risk assessments and preventing accidents at work.
Pressure systems and equipment laws
In the third unit students will be introduced to laws surrounding pressure systems and equipment at work. We will cover general health and safety legislation and the laws specific to pressure systems and equipment. Students will look at the enforcement duty holders.
Controlling and reducing risks
In the final unit students will have an introduction to preventing, controlling and reducing the risks associated with pressure systems and equipment in the workplace. This unit will explore the hierarchy of hazard controls and consider what duty holders must do regarding operating, inspection, maintenance, servicing , modifying and repairing pressure systems and equipment.
Health & Safety training for our friends at Kloeckner.
“We have used CPD online for a while now, the courses are great and the cost is too! CPD helps us to ensure our employees are trained in specific areas, whilst giving the student the flexibility of learning at their own pace.”
Rachel Priest
Health & Safety Advisor
Kloeckner Metals
Frequently Asked Questions
Learn more about this course and others that we offer. If you still have any questions, simply contact our course advisors on 0800 077 3063 or email hello@cpdonline.co.uk.
How long does the course take to complete?
This course takes a few hours to complete and you can do this without any restrictions. This means you can buy the course and start at any time. You can also begin your learning, stop and come back to the course to pick up where you left off.
Is this Introduction to pressure systems and equipment course accredited?
Yes the course is fully accredited through the CPD Certification Service. They review all of our content to check for quality, depth and that the material is fully up-to-date. Each year our membership with the service is renewed and all courses are thoroughly checked prior to being accredited.
Will I get a certificate when I finish?
Yes, as soon as you finish this course you can immediately download a PDF version of your personalised certificate. We also then send a fully printed copy to you by first class post.
How long does the certificate last?
The certificate after finishing this course lasts for 2 years until expiry which is when we recommend completing the training again. Some industries may require an update to CPD more frequently than this and others may not but, as a standard rule, we recommend completing the Introduction to pressure systems and equipment course every 2 years to ensure it is fresh in your mind and you understanding the latest regulations.
What are the benefits of completing this Introduction to pressure systems and equipment course online?
By completing this course online you can study in your own time and at your own pace. Having the ability to complete the units at a time to suit you engages your learning much more and enables you to interact and soak up the information easier.
RoSPA assured training course
This course has been checked and assured for quality and accuracy by RoSPA, the Royal Society for the Prevention of Accidents, to ensure it meets their exacting standards and is up-to-date. Formed over 100 years ago, RoSPA are committed to increasing safety measures and reducing accidents throughout numerous industries as well as campaigning for better standards in health and safety worldwide.
Your Health and Safety training partner
We specialise in Health and Safety courses and work with thousands of business to provide training and compliance for staff. Simply purchase staff training and then assign to your colleagues for completion at the click of a button.
We also offer great discounts for bulk orders – potentially saving you thousands of pounds in your training budget.
5+ courses – Save 10%
20+ courses – Save 20%
50+ courses – Save 30%
100+ courses – Save 40%
Reviews for our Introduction to pressure systems and equipment course
Our Certificates
Get instant access to a downloadable PDF version of your certificate once you finish your course. We also send out a printed version to you the next working day – these look great on your wall!
Recognised CPD certification
Fully recognised CPD certification.
Download and print
Print off a copy immediately once you finish.
Next day dispatch
We send out your certificates the day after you pass.
Unique ID included
Unique ID number that can be verified by employers.
Printed on 125gsm in full colour
Professionally printed with great quality.
Completion dates included
Never forget when to renew your certification.
Quality staff training
We work with companies of all sizes to provide budget-friendly training solutions to new and existing staff.
Our innovative system allows you to enrol, send login details, track progress and download certificates of colleagues all at the click of a button. With outstanding customer service on hand, companies choosing us for training benefit from quality courses as well as speedy support at all times.
Bulk discounts
30 day invoicing
Great support